OVHcloud Network Status
Current status
Legend
- Operational
- Degraded performance
- Partial Outage
- Major Outage
- Under maintenance
FS#12706 — rbx-g1-a9
Scheduled Maintenance
Report for Network & Infrastructure
Completed
We will update rbx-g1-a9 tonight. The intervention will start at 1:00am (GMT +1).
During the update the traffic will route via rbx-g2-a9.
Update(s):
Date: 2015-02-26 09:20:04 UTC
The chassis is now up-to-date and RSPs are now redundant!
RP/0/RSP0/CPU0:rbx-g1-a9#admin sh redundancy summary
Thu Feb 26 04:43:56.759 CEST
Active/Primary Standby/Backup
-------------- --------------
0/RSP0/CPU0(A) 0/RSP1/CPU0(S) (Node Ready, NSR: Ready)
0/RSP0/CPU0(P) 0/RSP1/CPU0(B) (Proc Group Ready, NSR: Ready)
Date: 2015-02-26 09:19:32 UTC
We rebooted the entire chassis to finalise the update.
Following this step, all the FPDs were up-to date.
Note: the 0/0/CPU0 card crashed several times before becoming stable again. It's a known issue and we will trace the cause before sending them to TAC.
However, we've reinserted the RSP1 into the chassis and synchronisation worked.
Date: 2015-02-26 09:14:11 UTC
The RSPO is properly up-to-date, as are the various linecardes.
However the RSP1 remains in the previous version.
We suspect that the high number of SMU that was present takes up too much space to copy the new image to the RSP as well.
We've removed the RSP1 from the cahssis to finalise the update and therefore delete the old images.
Date: 2015-02-26 09:11:41 UTC
Router is isolated.
We will update it.
Date: 2015-02-26 09:11:22 UTC
We will start to isolate rbx-g1-a9.
During the update, the traffic will go via rbx-g2-a9.
During the update the traffic will route via rbx-g2-a9.
Update(s):
Date: 2015-02-26 09:20:04 UTC
The chassis is now up-to-date and RSPs are now redundant!
RP/0/RSP0/CPU0:rbx-g1-a9#admin sh redundancy summary
Thu Feb 26 04:43:56.759 CEST
Active/Primary Standby/Backup
-------------- --------------
0/RSP0/CPU0(A) 0/RSP1/CPU0(S) (Node Ready, NSR: Ready)
0/RSP0/CPU0(P) 0/RSP1/CPU0(B) (Proc Group Ready, NSR: Ready)
Date: 2015-02-26 09:19:32 UTC
We rebooted the entire chassis to finalise the update.
Following this step, all the FPDs were up-to date.
Note: the 0/0/CPU0 card crashed several times before becoming stable again. It's a known issue and we will trace the cause before sending them to TAC.
However, we've reinserted the RSP1 into the chassis and synchronisation worked.
Date: 2015-02-26 09:14:11 UTC
The RSPO is properly up-to-date, as are the various linecardes.
However the RSP1 remains in the previous version.
We suspect that the high number of SMU that was present takes up too much space to copy the new image to the RSP as well.
We've removed the RSP1 from the cahssis to finalise the update and therefore delete the old images.
Date: 2015-02-26 09:11:41 UTC
Router is isolated.
We will update it.
Date: 2015-02-26 09:11:22 UTC
We will start to isolate rbx-g1-a9.
During the update, the traffic will go via rbx-g2-a9.